Trimble R10 LT HD RTK Base Rover TSC3

Trimble R10 LT HD GNSS RTK Base and Rover for sale with Trimble TSC3, Trimble TDL-450H complete kit. Still like new condition, used only a few times and has been very well taken care of. Everything has been shop tested, serviced and calibrated by Trimble authorized. Ready to working to survey and works flawlessly with Trimble working standards

Trimble R10 LT Dual Frequency GPS GNSS  RTK Set, is in full working order plus includes the case & accessories. Latest Trimble Survey GNSS Firmware Version Update, Latest Trimble Access version Update. This Trimble R10 GPS system is set up in very good condition and ready to go to work, these are the smallest and lightest receivers in its class. They have 450-470mhz frequency internal radio's with UHF Transmit (TX) option enabled in both receivers. So either one can function as a base station or a rover without a need for an external radio.

Both the base and rover are currently programmed at 12.5khz (So you would be FCC compliant). These units also have the 20hz update rate option enabled which makes them extremely fast. The R10's combine powerful features and groundbreaking technologies including Trimble HD-GNSS, Trimble SurePoint, Trimble 360, and Trimble x They have been shop tested and are ready to work out the box.

The TSC3 is in good condition and loaded with Trimble Access software and 2.4ghz radio for robotics. Roads can be added for additional cost. The Trimble TDL-450H radio has a max power of 35 watts for long range surveying. It is also programmed to the 12.5khz bandwidth. That means this entire system is FCC compliant. These unit's track L1, L2, L2c, L5 Galileo, Glonass and Compass satellites. These unit's are used so they have a few scrapes and scratches but nothing that affects performance. This unit can be used in an RTK set or on a VRS network. This is a complete RTK set.

Package Includes:

• Base and Rover 2X Trimble R10 LT Rover, 20hz update rate, Dual frequency L1, L2, L2c, L5, Galileo, GNSS Bluetooth, RTK capable, 450-470mhz internal RX/TX radio
• Base Radio: 1X Trimble TDL-450H  35 Watt Radio with 12.5khz Bandwidth
• 1X Trimble R10 LT Rover, 20hz update rate, Dual frequency L1, L2, L2c, L5, Galileo, GNSS Bluetooth, RTK capable, 450-470mhz internal RX/TX radio
• 1X Trimble TSC3 field controller with Trimble Access software version 10 and 2.4ghz internal radio
• 2X Batteries
• 2X Dual Charger
• Collector Cradle
• Cradle Holder
• Cables
• Carbon Fiber Rover Rod
• Crain Bi-pod
• Radio Antenna Tripod
• Trimble 2 Meter Fixed Tripod
• 3X Hard carrying case (R10 base, R10 rover, TDL-450H)

TRIMBLE R10 LT GNSS SYSTEM

The first of its kind, the Trimble R10 GNSS System is designed to help surveying professionals work more effectively. With powerful technologies like Trimble HD-GNSS, Trimble SurePoint, Trimble CenterPoint RTX, and Trimble xFill integrated into a sleek design, this powerful system goes beyond comprehensive GNSS support to ensure surveyors have the ability to collect more accurate data faster and easier—no matter what the job or the environment.

Key Features:

• Cutting-edge Trimble HD-GNSS processing engine
• Advanced satellite tracking with Trimble 360 receiver technology
• A scalable Trimble R10 receiver that can grow with your business
• All the essential features for GNSS surveying are included
• Scale up the solution later with optional features that include: Trimble SurePoint, xFill, CenterPoint RTX Technologies
• Sleek ergonomic design for easier handling

TRIMBLE HHD-GNSS PROCESSING ENGINE

The next generation of core positioning technology: Integrated into the Trimble R10 is the advanced Trimble HD-GNSS processing engine. This ground-breaking technology transcends traditional fixed/float techniques to provide a more accurate assessment of error estimates than traditional GNSS technology, especially in challenging environments. Markedly reduced convergence times as well as high position and precision reliability enable surveyors to collect measurements with confidence while reducing their occupation time.

TRIMBLE SUREPOINT TECHNOLOGY

• Simplifying the Survey Workflow: Trimble SurePoint technology incorporated into the Trimble R10 provides users with faster measurements, increased  accuracy, and greater quality control.
• An Alectronic  Bubble: The Trimble R10 employs an electronic bubble that appears on the Trimble controller display. With this eBubble, all  measurement information is displayed in one place and users don’t have to switch focus from the controller screen to the pole bubble to check that the pole is plumb
• Rapid, Accurate Measurement with Full Tilt Compensation: The system constantly monitors pole tilt for the user and will automatically compensate for any pole tilt while the point is automatically or manually measured. If a point is measured with pole tilt beyond a user-defined setting,  Trimble Access™software will alert the user and prompt them to accept or discard the point. Trimble SurePoint even uses the pole tilt as a controlling input. After a point is measured, tilting the pole causes the system to automatically prepare to measure the next point
• Data Traceability: As insurance that all of your data is traceable, the Trimble R10 can record the pole tilt information for measured points. These records include tilt and compass data for 100% data traceability

TRIMBLE 360 RECEIVER TECHNOLOGY

Future Proof your investment: Powerful Trimble 360 receiver technology in the Trimble R10 supports signals from all existing and planned GNSS  constellations and augmentation systems. With two integrated Trimble Maxwell™6 chips the Trimble R10 offers an unparalleled 440 GNSS channels. Trimble delivers business confidence with a sound GNSS investment for today and long into the future

TRIMBLE CENTERPOINT RTX TECHNOLOGY

RTK Level Precision Anywhere: Trimble CenterPoint RTX delivers RTK level precision anywhere in the world without the use of a local base station or Trimble VRS™Network. Survey using satellite delivered, CenterPoint RTX corrections in areas where terrestrial based corrections are not available. When surveying over a great distance in a remote area, such as a pipeline or utility right of way, CenterPoint RTX eliminates the need to continuously move base station or maintain connection to cell coverage.

TRIMBLE XFILLTECHNOLOGY
More continuous surveying, less downtime: Continue surveying without interruption when you temporarily lose connection to your base station or Trimble  VRS network. Leveraging a worldwide network of Trimble GNSS reference stations and satellite datalinks, Trimble xFill works to seamlessly ‘fill in’ for gaps in your RTK or VRS correction stream. 

ERGONOMICALLY DESIGNED
Easier Handling and operation: As the smallest and lightest integrated receiver in its class, the Trimble R10 is ergonomically designed to provide the  surveyor with effortless handling and operation. Designed for ease of use, the progressive design incorporates a more  stable center of mass at the top of the range pole, while its sleeker, taller profile provides the durability and reliability for which Trimble is known. The Trimble R10 receiver incorporates a quick release adaptor for simple and safe removal of the receiver from the range pole. Additionally, the quick release adaptor  ensures a solid, stable connection between the range pole and receiver.

AN INTELLIGENT SOLUTION: Advanced features combined with the powerful technology in the Trimble R10 make this the most intelligent GNSS system on the market today. 

• Smart battery: A smart lithium-ion battery inside the Trimble R10 system delivers extended battery life and more reliable power. A built-in LED battery status indicator allows the user to quickly check remaining battery life. 
• Advanced communication capabilities: The Trimble R10 uses the latest mobile phone technology to receive VRS corrections and connect to the Internet  from the field. Then, access Trimble Connected Community to send or receive documents while away from the office. Using WiFi, easily connect to the Trimble R10 system using a laptop or smartphone to configure the receiver without a Trimble controller.
• The trimble system of hardware and software that’s known and trusted: Bring the power and speed of the Trimble R10 system together with trusted Trimble software solutions, including Trimble Access and Trimble Business Center, to get the most complete, intelligent solution.

Trimble Access field software provides specialized and customized workflows to make surveying tasks quicker and easier while enabling teams to communicate vital information between field and office in real-time. Back in the office, users can seamlessly process data with Trimble Business Center office software.The Trimble R10 GNSS system, a new era of surveying productivity beyond GNSS for professional surveyors

Download Trimble R10 LT Datasheet.pdf